Dual Band Repeater System for Cellular, PCS and
GSM Applications (25,000 to 50,000 square feet*)

The SR Series Large Office In-building Repeater System extends both 800/850MHz and 1900MHz services (Approved for Verizon Cingular, AT&T, Sprint, T-Mobile, etc.) into buildings and other poor coverage areas. This system is designed for use with all carrier (except Nextel)and offers a cost-effective solution for small business and residential applications. These repeater systems come complete with all items needed to install them. (This system does not cover Nextel 2-Way) Five pre-configured systems are available on this page. For custom configurations, please call us.

More links in this Section:

Repeater Learning Center

Repeaters

Antennas

Phone Adapters

3 Watt Boosters

Glass Mount Antennas

Mag Mount Antennas

Body Mount Antennas

Panel Antennas

Grid Antenna

Yagi Antennas

Connectors

Couplers

Splitters/Combiners

Bulk Cable

Pre-Made Cables

Lightning
Protection

#SRDBRPTS2P

#SRDBRPTS2O

These systems are designed for areas where Wireless service is available outside of the building yet marginal indoors.This system is a completely network-compatible and Carrier recommended device that amplifies PCS signals in both the uplink and downlink directions. The system is simple to install, and contains circuitry to ensure proper operating power levels, and as well, includes automatic low isolation and detection circuitry that detects low isolation between the indoor and outdoor antennas. In this condition, the repeater will adjust it's gain to compensate for the abnormality, and warn the user through an indicator LED. This repeater system will also work well with wireless PDAs and laptop personal computers with wireless PC cards. Linear operation is guaranteed under all conditions.

The SR Series Repeater System allows up to two indoor antennas (dependent on system ordered) to be used without the need of external components (like a splitter/divider). The auxiliary indoor antenna port allows a second indoor zone to be easily connected. The repeater can be battery-backed by connecting the BDA's 12VDC supply to the spades of a rechargeable battery with the BDA's optional battery back-up interface cable. The rechargeable battery is then permanently connected to the battery manufacturer's recommended trickle charger keeping the battery charged indefinitely, ready in the event of a building power failure.

Be sure to check out our Repeater Tutorial to make sure this is the right system for your application.

#SRDBRPTS1P

#SRDBRPTS1O

#SRDBRPTSOP

Systems Feature:

• Easy Installation – no calibration required - Everything is included in the system
• Full Installation instructions are included.
• System includes Low Loss LMR240 35' Cables and 1'-2' jumpers (longer cables available)
• Up to 50,000 sq. ft. of free space coverage (with two interior antennas)
• Automatic Low Isolation Detection and Indication Circuitry,
• Feedback Overload Shutdown and Auto Start,
• Auto levelling circuitry ensures linear operation
• Network-compatible, approved and recommended operation
• Auxiliary in-building antenna port provides enhanced coverage
• Fully FCC and Carrier approved
• Can be connected to battery back-up system for emergency powering, (12vdc)
• Optional battery back-up interface cable available
   

BDA General Specifications

Power Requirements 120V AC adapter included. (500mA @ 12V)

For battery back-up, third party back-up system must be +12VDC, 8 Amp-Hours min (for 8 hours operation on battery)

Operating Temperature Range -40 to +60 C (-40 to 140 F); indoor use only

Dimensions 165mm L x 152mm W x 33mm H (6.50” L x 5.98” W x 1.30” H) without RF connectors

Included Accessories 120V AC adapter

Up-link

Frequency Range (MHz) 824-896 and 1850-1910

Low Isolation Detection An amber LED indicator will indicate low isolation between indoor and outdoor antennas

Maximum Gain (dB) 60 (each output port)

Output Power (dBm) +23

Down-link

Frequency Range (MHz) 869-894 and 1930-1990

Output Power (dBm) +15

Group Delay 150 nS (Typical)

Maximum Gain (dB) 60

Gain Flatness +/- 3 dB

Noise Figure < 6 dB

Maximum Possible Exposure (MPE): At the interior antenna port, exposure to non-ionizing radiation meets or exceeds the permissible FCC mandated MPE specification

Typical System Layouts and systems available:

#SRDBRPTS1O (1 Omni Coverage)

#SRDBRPTS2O (2 Omni Coverage)

#SRDBRPTS1P (1 Panel Coverage)

#SRDBRPTS2P (2 Panel Coverage)

#SRDBRPTSOP (1 Omni 1 Panel Coverage)

SRDBRPTSOP is a Hybrid of these two systems.

Lightning Protection
Click Here

Important Notes:

All of our repeater systems are subject to a restocking charge. Systems are returnable within 30-Days of original purchase. You will need a Return Authorization (RMA) before returning. And of course there are conditions and limitations.

To drastically cut back on the need for returns of these systems we offer and STRONGLY encourage as much pre-sales consulation as is necessary for you and/or your associates to completely understand the proper implementation of the system and it's expected capabilities. We will collect vital information from you about your planned purchase and installation in order to be sure you are proceeding in the right direction. There is NO CHARGE for these consultations. Our phone number is even Toll Free! 1(800) 238-2811 In fact, if you order one of these systems via this website and you haven't spoken to us yet, you'll be contacted before we begin to process your order. By doing this we virtually eliminate the need for customers to return these systems. We know that when these repeater systems are pre-planned and correctly installed that they will in most cases exceed expectations. We will NEVER try to sell you a system that has extras you don't need. We will always help you get the system that most closely fits your situation. If you're serious about improving the reception in your situation, we're serious about making it possible!

Warranty: Our repeater systems carry a Full One-Year warranty - Certain restrictions apply.

Specifications and Pricing subject to change without notice.

Please check local regulations regarding installation of external antennas.

Installation is the responsibility of the purchaser. Criterion Cellular provides friendly, knowledgeable and free technical support via phone and for questions regarding installation and application both before and after the sale -- However, Criterion Cellular personnel will not provide support at your location.

This Site Copyright ©1996-2010 Criterion Cellular. All Rights Reserved. Some logos and graphics used are trademarks of their respective owners. Prices subject to change without notice. Not responsible for typographical or photographical errors. Some products may not be available in all areas. All prices are in US dollars. We reserve the right to modify product pricing and/or specifications without prior notice. We do not sell or rent our customer information - Privacy Notice. Site questions / comments / problems mail to

.